彈簧用碳鋼片
carbonsteel strip for spring use
冷軋狀態 cold rolled strip
回火狀態 annealed strip
淬火及回火狀態
hardened & tempered strip/ precision – quenched steel strip
貝氏體鋼片 bainite steel strip
彈簧用碳鋼片材之邊緣處理 edge finished
淬火劑
quenching media
碳鋼回火 tempering
回火有低溫回火及高溫回火
low & high temperature tempering
高溫回火
high temperature tempering
退火 annealing
完全退火 full annealing
擴散退火 diffusion annealing
低溫退火 low temperature annealing
中途退火 process annealing
球化退火 spheroidizing annealing
光輝退火 bright annealing
淬火 quenching
時間淬火 time quenching
奧氏鐵孻回火 austempering
馬氏鐵體淬火 marquenching
高碳鋼片用途 end usage of high carbon steel strip
冷軋高碳鋼 – 日本工業標準
cold-rolled (special steel) carbon steel strip to jis g3311
電鍍金屬鋼片 plate metal strip
簡介 general
電鍍金屬捆片的優點
advantage of using plate metal strip
金屬捆片電鍍層
plated layer of plated metal strip
鍍鎳 nickel plated
鍍鉻 chrome plated
鍍黃銅 brass plated
基層金屬 base metal of plated metal strip
低碳鋼或鐵基層金屬
iron & low carbon as base metal
不鏽鋼基層金屬 stainless steel as base metal
銅基層金屬
copper as base metal
黃銅基層金屬
brass as base metal
軸承合金 bearing alloy
簡介
general
軸承合金 – 日工標準 jis h 5401
bearing alloy to jis h 5401
錫基、鉛基及鋅基軸承合金比較表
comparison of tin base, lead base and zinc base alloy for bearing
purpose
易溶合金 fusible alloy
焊接合金 soldering and brazing alloy
軟焊 soldering alloy
軟焊合金 – 日本標準 jis h 4341
soldering alloy to jis h 4341
硬焊 brazing alloy
其它焊接材料請參閱日工標準目錄
other soldering material
細線材、枝材、棒材
chapter five wire, rod & bar
線材/枝材材質分類及製成品
classification and end products of wire/rod
鐵線(低碳鋼線)日工標準 jis g 3532
low carbon steel wires ( iron wire ) to jis g 3532
光線(低碳鋼線)，火線(退火低碳鋼線)，鉛水線 (鍍鋅低碳鋼線)及製造釘用低碳鋼線之代號、公差及備註
ordinary low carbon steel wire, annealed low carbon steel wire,
galvanized low carbon steel wire & low carbon steel wire for nail
manufacturing - classification, symbol of grade, tolerance and
remarks.
機械性能
mechanical properites
鋅包層之重量，銅硫酸鹽試驗之酸洗次數及測試用捲筒直徑
weight of zinc-coating, number of dippings in cupric sulphate test
and diameters of mandrel used for coiling test
冷沖及冷鍛用碳鋼線枝
carbon steel wire rods for cold heading & cold forging (to jis
g3507)
級別，代號及化學成份
classification, symbol of grade and chemical composition
直徑公差，偏圓度及脫碳層的平均深度
diameter tolerance, ovality and average decarburized layer depth
冷拉鋼枝材
cold drawn carbon steel shafting bar
枝材之美工標準，日工標準，用途及化學成份
aisi, jis end usage and chemical composition of cold drawn carbon
steel shafting bar
冷拉鋼板重量表
cold drawn steel bar weight table
高碳鋼線枝
high carbon steel wire rod (to jis g3506)
冷拉高碳鋼線
hard drawn high carbon steel wire
(to jis g3521, iso-84580-1&2)
化學成份分析表
chemical analysis of wire rod
線徑、公差及機械性能(日本工業標準 g 3521)
mechanical properties (jis g 3521)
琴線(日本標準 g3522)
piano wires ( to g3522)
級別，代號，扭曲特性及可用之線材直徑
classes, symbols, twisting characteristic and applied wire diameters
直徑，公差及拉力強度
diameter, tolerance and tensile strength
裂紋之容許深度及脫碳層
permissible depth of flaw and decarburized layer
常用的彈簧不鏽鋼線-編號，特性，表面處理及化學成份
stainlessspring wire – national standard number, charateristic,
surface finish & chemical composition
彈簧不鏽鋼線，線徑及拉力列表
stainless spring steel, wire diameter and tensile strength of spring
wire
處理及表面狀況
finish & surface
各種不鏽鋼線在不同處理拉力比較表
tensile strength of various kinds of stainless steel wire under
different finish
圓徑及偏圓度之公差
tolerance of wire diameters & ovality
鉻鎳不鏽鋼及抗熱鋼彈簧線材 –
美國材驗學會 astm a313 – 1987
chromium – nickel stainless and heat-resisting steel spring wire –
astm a313 – 1987
化學成份 chemical composition
機械性能 mechanical properties
305, 316, 321及347之拉力表
tensile strength requirements for types 305, 316, 321 and 347
a1s1-302 貳級線材之拉力表
tensile strength of a1s1-302 wire
日本工業標準 – 不鏽鋼的化學成份(先數字後字母排列)
jis – chemical composition of stainless steel (in order of number &
alphabet)
美國工業標準 – 不鏽鋼及防熱鋼材的化學成份
(先數字後字母排列)
aisi – chemical composition of stainless steel & heat-resistant
steel(in order of number & alphabet)
易車碳鋼
free cutting carbon steels (to jis g4804 )
化學成份 chemical composition
圓鋼枝，方鋼枝及六角鋼枝之形狀及尺寸之公差
tolerance on shape and dimensions for round steel bar, square steel
bar, hexagonal steel bar
易車(快削)不鏽鋼 free cutting stainless steel
易車(快削)不鏽鋼種類 type of steel
易車(快削)不鏽鋼拉力表
tensile strength of free cutting wires
枝/棒無芯磨公差表 (μ) (μ = 1/100 mm)
rod/bar centreless grind tolerance
易車不鏽鋼及易車鋼之不同尺寸及硬度比較
hardness of different types & size of free cutting steel
扁線、半圓線及異形線
flat wire, half round wire, shaped wire and precision shaped fine
wire
加工方法
manufacturing method
套用材料
material used
特點
characteristic
用途
end usages
不鏽鋼扁線及半圓線常用材料
commonly used materials for stainless flat wire & half round wire
扁線公差
flat wire tolerance
方線公差
square wire tolerance