冶金專業英語辭彙(T)

t bar t 形梁
t beam t 形鋼
t iron 丁字鋼
t joint 丁字接頭
t steel 丁字鋼
t t t curve 等溫轉變曲線
table 台;輥道
tachometer 轉速表
tack welding 定位焊
tag 壓尖端
tagging 鍛尖
tail end 尾端
tail puller 帶卷直頭裝置
tail stripper 帶卷直頭裝置
tailing device 成卷帶材端頭扳直裝置
tailing pond 尾礦池
tails 尾礦
tainton process 泰因通法
take up block 收線卷
take up reel 繞線機
talbot process 塔爾伯特平爐煉鋼法
talc 滑石
tamped lining 打結爐襯
tamped refractory 搗制耐火材料
tamping 搗固
tamping bar 搗錘
tandem drawing 串列式拉拔
tandem furnace 串聯平爐
tandem mill 串列式軋機
tangential force 切向力
tangential slip 切線滑移
tangential stress 切向應力
tank 槽
tank voltage 槽電壓
tannin 丹寧
tantalic acid 鉭酸
tantalite 鉭鐵礦
tantalum 鉭
tantalum carbide 碳化鉭
tantalum chloride 氯化鉭
tap cinder 攪煉爐的鐵口渣;高爐下渣
tap degassing 出鋼真空脫氣法
tap density 振實密度
tap out bar 開口釺
tap to tap time 冶煉時間
tap volume 振實體積
taper 錐度
taper of groove 軋槽側壁斜度
taper of ingot 鋼錠錐度
tapered roll 錐形軋輥
tapered roller 錐形輥
taphole clay 堵口泥
taphole drilling 鐵口鑽
taphole drilling machine 開口機
tapiolite 重鉭鐵礦
tapping 出鐵
tapping bar 開口釺
tapping sample 出鐵試樣
tapping spout 出鋼槽
tapping temperature 出鋼溫度
tar 焦油
tar dolomite brick 焦油白雲石磚
tarnish 無光澤表面;氧化膜
tarnish resisting alloy 抗變色合金
tartaric acid 酒石酸
tea lead 包茶鉛箔
tear 劃傷
tear test 撕裂試驗
technetium 鎝
technical analysis 工業分析
technically pure iron 工業純鐵
technological process 工藝過程
technological properties 工藝性能
teeming 澆鑄
teeming crane 澆注起重機
teeming lap 澆注重皮
teeming platform 澆鑄台
teeming practice 澆鑄法
teeming speed 澆注速率
teeming temperature 澆注溫度
telecontrol 遙控
telluric acid 碲酸
telluride 碲化物
tellurite 黃碲礦
tellurium 碲
tellurobismuthite 碲鉍礦
temper 回火
temper brittleness 回火脆性
temper carbon 退火碳
temper graphite 退火碳
temper hardening 回火硬化
temper mill 平整機
temper rolled sheet 平整冷軋的薄板
temperability 回火性
temperature 溫度
temperature coefficient 溫度係數
temperature control 溫度第
temperature difference 溫度差
temperature distribution 溫度分布
temperature equalizing 溫度均衡
temperature fall 溫度下降
temperature field 溫度場
temperature gradient 熱梯度
temperature indicator 溫度指示器
temperature interval 溫度間距
temperature of sintering 燒結溫度
temperature resistance coefficient 電阻溫度係數
temperature scale 溫度標
temperature stress 溫差應力
tempered martensite 回火馬氏體
tempered steel 回火鋼
tempered structure 回火組織
tempered troostite 回火屈氏體
tempering 回火
tempering bath 回火浴
tempering color 回火色
tempering furnace 回火爐
tempering hardness 回火硬度
tempering resistance 耐回火性
tempering sorbite 回火訟體
tempering temperature 回火溫度
tempering troostite 回火屈氏體
tempilstick 示溫色筆
template 刮板
template molding 刮板造型
templet 刮板
tenacity 韌性
tendency to cracking 碎裂瞧
tengerite 水菱釔礦
tennantite 砷銅礦
tenorite 黑銅礦
tensile force 拉力
tensile impact test 抗拉沖輝驗
tensile load 拉伸載荷
tensile strain 拉伸變形
tensile strength 抗拉強度
tensile stress 拉應力
tensile test 拉力試驗
tensile test piece 拉伸試樣
tensile test specimen 拉伸試樣
tensile testing machine 拉伸試驗機
tension 拉緊
tension device 張緊裝置
tension leveling 拉伸矯直
tension load 拉伸載荷
tension ph diagram 波度指數 電點陣圖
tension test 拉力試驗
tensometer 變形測定器張力計
tephroite 錳橄欖石
terbium 鋱
ternary alloy 三元合金
ternary compound 三元化合物
ternary diagram 三元系狀態圖
ternary eutectic 三元共晶體
ternary system 三元系
terne metal 鉛錫合金
terne plate 鍍鉛錫合金鋼板
tertiary cementite 三次滲碳體
tertiary creep 加速蠕變
tertiary metallurgy 再熔冶金
test bar 試樣棒
test conditions 試驗條件
test furnace 試驗爐
test lead 試鉛
test piece 試樣
test rod 試樣棒
test sample 試樣
test specimen 試樣
test tube 試管
testing of materials 材料試驗
tetrachloride 四氯化物
tetradymite 輝碲鉍礦
tetrafluoride 四氟化物
tetragonal crystal 正方晶體
tetragonal lattice 正方晶格
tetragonal martensite 正方晶格馬氏體
tetragonal system 正方晶系
tetragonality 正方性
tetrahedrite 銅礦
tetravacancy 四空位
tetroxide 四氧化物
texture 織構
textured alloy 織構合金
tfs 無錫鍍層薄板
thalenite 紅釔石
thallium 鉈
thallium oxide 氧化鉈
theisen cleaner 泰森式洗滌機
theisen rotary disintegrator 泰森式洗滌機
theisen washer 泰森式洗滌機
theoretical density 理論密度
thermal activation process 熱活化過程
thermal agitation 熱攪動
thermal analysis 熱分析
thermal arrest 熱轉變點
thermal balance 熱平衡
thermal black 熱裂炭黑
thermal capacity 熱容量
thermal conduction 熱傳導
thermal conductivity 導熱率
thermal conductor 導熱體
thermal contraction 熱收縮
thermal convection 熱對流
thermal crack 熱裂紋
thermal cycle 熱循環
thermal decomposition 熱解
thermal dendrite 熱枝晶體
thermal diffusion 熱擴散
thermal diffusivity 熱擴散性
thermal dilatation 熱膨脹
thermal dissociation 熱離解
thermal efficiency 熱效率
thermal energy 熱能
thermal equilibrium 熱平衡
thermal equivalent 熱當量
thermal expansion 熱膨脹
thermal expansion coefficient 熱膨脹係數
thermal extension 熱伸長
thermal fatigue 熱疲勞
thermal flow 熱流
thermal gradient 熱梯度
thermal hysteresis 熱滯後
thermal inertia 熱惰性
thermal insulation 絕熱
thermal insulator 絕熱材料
thermal lag 熱惰性
thermal load 熱負荷
thermal losses 熱損失
thermal probe 熱探針
thermal radiation 熱輻射
thermal refining 熱凳
thermal resistance 熱阻
thermal shock 熱衝擊
thermal shock resistance 抗熱沖輝
thermal spalling 熱剝落
thermal spike 溫度峰值
thermal stress 熱應力
thermal treatment 熱處理
thermal vacancy 熱空位
thermal vibration 熱振動
thermalloy 薩馬洛依合金
thermion 熱離子
thermistor 熱敏電阻
thermistor thermometer 熱變電阻溫度計
thermit 鋁熱劑
thermit fusion welding 鋁熱熔焊
thermit mold 鋁熱鑄型
thermit process 鋁熱法
thermit welding 鋁熱焊
thermobalance 高溫天平
thermochemical equation 熱化學方程式
thermochemical treatment 熱化學處理
thermocouple 熱電偶
thermocouple gauge 熱電偶真空計
thermocurrent 熱電流
thermodiffusion 熱擴散
thermodynamic activity 熱力學活度
thermodynamic equilibrium constant 熱力學平衡常數
thermodynamic function 熱力學函式
thermodynamic parameter 熱力學參數
thermodynamic potential 熱力勢
thermodynamic quantity 熱力學量
thermodynamic state 熱力學狀態
thermodynamic variable 熱力學參數
thermodynamical equilibrium 熱力學平衡
thermodynamics 熱力學
thermoelastic coefficient 熱彈性係數
thermoelectric couple 熱電偶
thermoelectric current 熱電流
thermoelectric effect 熱電效應
thermoelectric power 熱電動力
thermoelectric pyrometer 熱電高溫計
thermoelectric thermometer 熱電溫度計
thermoelectricity 熱電
thermoelectromotive force 熱電動力
thermoelectron 熱電子
thermogram 溫度自記曲線
thermography 熱量圖示測量法
thermogravimetric analysis 熱解重量分析
thermolysis 熱解
thermomagnetic analysis 熱磁分析
thermomagnetic treatment 熱磁處理
thermomechanical process 形變熱處理法
thermomechanical rolling 形變軋制
thermomechanical treatment 形變熱處理
thermometallurgy 火法冶金學
thermometer 溫度計
thermopile 熱電堆
thermoregulator 溫度第器
thermostability 熱穩定性
thermostat 恆溫器
thermostat metal 恆溫潑複合金屬
thick covered stick electrode 塗藥厚層單根焊條
thick plate 厚板
thick wall pipe 厚壁管
thick walled tube 厚壁管
thickener 濃縮機
thickening 濃縮
thickness deviation 厚度公差
thickness gage 測厚計
thin coated electrode 薄塗料焊條
thin foil 薄箔
thin plate 薄板
thin sheet 薄板
thin sheet mill 薄板軋機
thin wall pipe 薄壁管
thin walled blast furnace 薄爐身高爐
thin walled tube 薄壁管
thinner 稀釋劑
thinning 稀釋
thiocyanate 硫代氰酸鹽
thionic acid 硫羰酸
third order reaction 三級反應
thomas converter 托馬斯轉爐
thomas iron 托馬斯生鐵
thomas process 鹼性轉爐煉鋼法
thomas slag 鹼性轉爐爐渣
thomas steel 鹼性轉爐鋼
thoria 氧化釷
thorianite 方釷石
thoriated tungsten electrode 加有氧化釷的鎢電極
thorite 釷石
thorium 釷
thorium nitrate 硝酸釷
thorium oxalate 草酸釷
thorium oxide 氧化釷
thorium reactor 釷堆
thorogummite 脂鉛釷鈾礦
thorough repair 大修
thortveitite 鈧釔石
thread rolling 螺鏇滾壓成形
threaded pipe 螺紋管
three axial deformation 多軸變形
three component alloy 三元合金
three component system 三元系
three fold axis 三次軸
three furnace process 三聯法
three high mill 三輥式軋機
three high rolling stand 三輥機座
three o'clock welding 橫向立焊
three part alloy 三元合金
three part box 三開箱
three phase region 三相區域
three roll pass 三輥孔型
three roll piercer 三輥穿孔機
three roll piercing 三輥穿孔
three stand mill 三機座軋機
throat 爐頂
throat diameter 爐喉直徑
throat opening 爐口
throat platform 爐頂平台
throat temperature 爐頂溫度
throat thickness 焊縫厚度
through carburizing 穿透滲碳
through hardening 穿透硬化
through heating 穿透加熱;熱透
through hole 穿孔
throwing power 均一電鍍能力
thrust 軸向推力
thrust bearing 止推軸承
thrust shaft 止推軸
thulium 銩
tie line 兩平衡相成分點間連線
tie plate 鋼軌墊板
tie rod 拉桿
tig spot welding 鎢極惰性氣體保護點焊
tig welding 惰性氣體保護鎢極電弧焊
tight rolling 疊軋
tilt boundary 傾斜晶界
tilt hammer 杵錘
tilt table 擺動升降台
tilting furnace 傾動式爐
tilting gear 翻鋼機
tilting lever 傾斜槓桿
tilting mechanism 傾動機構
tilting open hearth furnace 傾動式平爐
time quenching 限時淬火
time temperature transformation curve 等溫轉變曲線
time to failure 破壞時間
time to rupture 破壞時間
tin 白鐵板
tin alloy 錫合金
tin amalgam 錫汞齊
tin bar 錫棒
tin base alloy 錫基合金
tin bath 錫浴
tin bronze 錫青銅
tin chloride 氯化錫
tin cry 錫嗚
tin disease 錫病
tin foil 錫箔
tin free steel 無錫鍍層薄板
tin leaf 錫箔
tin ore 錫礦
tin oxide 氧化錫
tin pest 錫病
tin plating 鍍錫
tin solder 焊錫
tin sweat 錫珠
tincal 原硼砂
tinned plate 白鐵板
tinned steel sheet 白鐵板
tinned wire 鍍錫線
tinning 鍍錫
tinplate 白鐵板
tinplate mill 鍍錫薄鋼板軋機
tiny crack 毛細裂紋
tip 電極端
tipper 翻轉機
tipping wagon 翻斗車
tire 輪箍
tire mill 輪箍軋機
tire steel 輪箍鋼
titanate 鈦酸鹽
titania 二氧化鈦
titanic acid 鈦酸
titanic anhydride 鈦酸酐
titaniferous pig iron 含鈦生鐵
titanite 榍石
titanium 鈦
titanium alloy 鈦合金
titanium aluminum alloy 鈦鋁合金
titanium base alloy 鈦基合金
titanium bronze 鈦青銅
titanium carbide 碳化鈦
titanium chloride 氯化鈦
titanium dioxide 二氧化鈦
titanium oxide 二氧化鈦
titanium sponge 海綿鈦
titanium sulfate 硫酸鈦
titanium tetrachloride 四氯化鈦
titanium trichloride 三氯化鈦
titanium white 鈦白
titanizing 鍍鈦
titanomagnetite 鈦磁鐵礦
titration 滴定
tn process 矽鈣噴吹精煉法
toe crack 焊縫邊裂紋
toe of weld 焊跳
toggle press 肘桿壓機
tolerance 公差
tombac 頓巴克黃銅
tongs 夾鉗
tonnage steel 普通鋼
tool 工具
tool steel 工具鋼
tooling quality 可切顯
toothed wheel 齒輪
top 頂層
top and bottom blowing 頂底吹煉
top and bottom blown converter 頂底吹轉爐
top and bottom process 奧輻德頂底分層煉鎳法
top arrangement 爐頂裝置
top blowing 頂吹
top blown converter 頂吹轉爐
top casting 上鑄
top charger 爐頂裝料裝置
top charging device 爐頂裝料裝置
top closing device 爐頂封閉裝置
top die 上模
top discard 錠頭廢料
top flask 上型箱
top gas 爐頂媒氣
top gas energy 爐頂媒氣能
top gate 頂澆口
top guide 上衛板
top hat 鋼殼凹帽頭
top hoist 爐頂卷揚機
top housing separat 機座上橫樑
top mill separator 機座上橫樑
top molding box 上型箱
top opening 頂部口
top part 上型箱
top pouring 上鑄
top pressure 爐頂壓力
top roll 上輥
top throat 爐頂喉
topping 切除頭部
tops 上層
torbernite 銅鈾雲母
torch 噴燈
torch brazing 焰炬加熱斷焊
torch hardening 火焰淬火
torch head 割炬燒噴嘴
torn edge 撕裂邊
torpedo ladle 混鐵爐式盛鐵桶
torque 扭轉力矩
torquemeter 扭矩測定器
torsiometer 扭力計
torsion 扭轉
torsion impact test 扭轉沖輝驗
torsion moment 扭矩
torsion strength 抗扭強度
torsion test 扭轉試驗
torsional deformation 扭轉變形
torsional elasticity 扭轉彈性
torsional force 扭力
torsional resistance 抗扭強度
torsional rigidity 抗扭剛度
torsional strain 扭變形
torsional stress 扭應力
total analysis 全分析
total carbon 總碳量
total corrosion 全面腐蝕
total iron 總鐵
total porosity 總氣孔率
total pressure 總壓力
total radiation pyrometer 全輻射高溫計
total yield 總回收率
tough metal 韌性金屬
tough pitch copper 紫銅
toughener 增強劑
toughening 韌化
toughness 韌性
tourmaline 電氣石
tower type accumulator 貯料塔
tower type furnace 塔式爐
tracer 同位素指示劑
transcrystalline corrosion 穿晶腐蝕
transcrystalline fracture 穿晶斷裂
transfer 傳達
transfer bed 移送機
transformation 轉變
transformation point 轉變點
transformation range 轉變區域
transformation temperature 轉變溫度
transformer 變壓器
transformer sheet 變壓浦板
transgranular corrosion 穿晶腐蝕
transgranular fracture 穿晶斷裂
transgranular stress corrosion cracking 穿晶應力腐蝕開裂
transient creep 過渡蠕變
transient phase 過渡相
transition 轉移
transition element 過渡元素
transition heat 轉變熱
transition lattice 過渡晶格
transition metal 過渡金屬
transition phase 過渡相
transition point 轉變點
transition state 轉變狀態
transition temperature 轉變溫度
transition zone 過渡區
translation lattice 平移點陣
transmission 透過
transmission method 透射法
transpiration cooling 蒸發冷卻
transporter 搬運機
transuranic element 超鈾元素
transval mill 可控供給角的三輥式輾軋機
transverse bending test 橫向彎曲試驗
transverse crack 橫裂
transverse cutting unit 橫切機
transverse deformation 橫向形變
transverse ductility 橫向延性
transverse force 橫向力
transverse rolling 橫向軋制
transverse seam welding 橫縫滾焊
transverse section 橫斷面
trap 捕集器
travel crane 移動起重機
traveling roller table 移動式輥道
trechmannite 硫砷銀礦
tree dislocation 林位錯
triad axis 三次軸
trial load 試驗荷載
tribonucleation 摩擦成核
trichloride 三氯化物
triclinic lattice 三斜晶格
triclinic system 三斜晶系
tridymite 鱗石英
trigonal lattice 三方晶格
trigonal system 三方晶系
trimmed edge 切斷邊緣
trimming 切邊
trimming shears 剪邊機
trioxide 三氧化物
triphane 鋰輝石
triple bond 三鍵
triple point 三相點
triplex process 三聯法
tripper 翻料機;自動傾卸車
trisilicate 三矽酸鹽
trivacancy 三空位
trommel screen 圓筒篩
trona 天然礦
troostite 屈氏體
tropenas converter 特羅彭納斯側吹轉爐
trough 溝
true annealing 完全退火
true limiting creep stress 真極限蠕變應力
true stress 真實應力
true tensile stress 真實抗張應力
trumpet 中心周
trunnion of converter 轉爐耳軸
trunnion ring 支圈
tube 管
tube bender 彎管機
tube drawbench 拉管機
tube drawing 拔管
tube drawing bench 拉管機
tube extrusion press 管擠壓機
tube forming mill 管材成型機
tube furnace 管式爐
tube pointing 管端壓尖
tube push mill 頂管機
tube reducing mill 管材減徑機
tube rolling 軋管
tube rolling mill 軋管機
tube skelp 有縫管坯
tube stock 管材
tube strip 焊管坯
tube type mold 管式結晶器
tube upset 管端鐓粗
tube wall 管壁
tube welding 焊管
tube welding mill 焊管機
tubular billet 毛管
tubular condenser 管式冷凝器
tubular mold 管式結晶器
tumbler index 轉鼓試驗強度
tumbler strength 轉鼓強度
tumbling 滾筒清理
tumbling mixer 滾動混合機
tundish 中間罐
tundish capacity 中間罐容量
tundish car 中間包小車
tundish casting 中間罐澆注
tundish lid 中間包罩
tundish lining 中間罐內襯
tundish preheating station 中間罐預熱站
tundish superheat 中間罐過熱
tungstate 鎢酸鹽
tungsten 鎢
tungsten alloy 鎢合金
tungsten arc inert gas welding 惰性氣體保護鎢極電弧焊
tungsten brass 鎢黃銅
tungsten bronze 鎢青銅
tungsten carbide 碳化鎢
tungsten cobalt alloy 鎢鈷合金
tungsten filament 鎢絲
tungsten impregnation 鎢浸透法
tungsten inert gas spot welding 鎢極惰性氣體保護點焊
tungsten ore 鎢礦
tungsten powder 鎢粉
tungsten steel 鎢鋼
tungsten trioxide 三氧化鎢
tungsten wire 鎢絲
tungstenite 硫鎢礦
tungstic acid 鎢酸
tungstic anhydride 鎢酸酐
tungstite 鎢華
tunnel drier 隧道式乾燥器
tunnel effect 隧道效應
tunnel furnace 隧道式爐
tunnel kiln reduction 隧道窯還原
tup 錘頭
turanite 羥釩銅礦
turbidimeter 濁度計
turbidimetry 比濁法
turbidity 混濁度
turbo blower 透平鼓風機
turbo compressor 渦輪壓縮機
turbulence 紊流
turbulent burner 紊琳嘴
turbulent flow 亂流
turn around table 迴轉台
turn over cooling bed 翻轉冷床
turndown 傾爐
turning 翻轉
turnover device 翻鋼裝置
tuyere 風口
tuyere apparatus 風嘴設備
tuyere cap 風口冒蓋
tuyere cooler 風口冷卻器
tuyere gas 風口煤氣
tuyere hole 風口
tuyere nose 風口嘴
tuyere nose flame temperature 風口嘴火焰溫度
tuyere notch 風口
tuyere nozzle 風口噴嘴
tuyere zone 風口區
twelve high rolling mill 十二輥軋機
twelve high stand 十二輥機座
twenty high rolling mill 二十輥軋機
twenty high stand 二十輥式機座
twin 雙晶
twin axis 雙晶軸
twin band 雙晶帶
twin boundary 雙晶間界
twin chambered furnace 雙室爐
twin fault 孿晶層錯
twin hearth furnace 雙床平爐
twinned crystal 孿晶體
twinning 雙晶形成
twinning plane 雙晶面
twist 扭轉
twist boundary 扭轉晶界
twist guide 扭轉導板
twist rollers 翻轉輥
twisted strip 扭曲帶鋼
twisting force 扭力
twisting resistance 抗扭強度
twisting strain 扭變形
twisting strength 抗扭強度
twisting stress 扭應力
twisting test 扭轉試驗
two compartment furnace 雙室爐
two component alloy 二元合金
two component eutectic 二元共晶
two component system 二元系
two dimensional nucleus 二維晶核
two high blooming mill 二輥式初軋機
two high mill 二輥式軋機
two high mill stand 二輥機座
two high plate mill 二輥式中厚板軋機
two high reversing mill 可逆式二輥軋機
two high sheet rolling mill 二輥式薄板軋機
two high universal mill 萬能二輥式軋機
two phase region 兩相區域
two phase structure 兩相結構
two piece pattern 對合箱模型
two roll pass 二輥孔型
two roll piercing 二輥軋管機上穿孔
two stepped quenching 二步淬火
two strand mill 雙線軋機
type metal 印刷金屬
tyre 輪箍
tyre mill 輪箍軋機
tyre steel 輪箍鋼
tyre wire 輪胎鋼絲