測量員英文自我評價 篇1
Blink of an eye 10 years have gone, we ushered in a new year. Summing up the work of the past year, from a personal point of view about the measurement of awareness.
Quality is the life, quality is the fundamental guarantee for enterprise development. In the fierce competition in the construction market today, how to improve the construction quality management level is every enterprise managers must think about. Factors affecting the quality of construction in all aspects. From the engineering measurement point of view, analyze the work of measuring the pay-off to ensure and improve the quality of the construction of an important role, and simply how to strengthen the management of measurement work to improve the quality of construction.
It is a very important technical work of municipal road engineering that the measuring and measuring line is an important technical work. It is inseparable from the whole process of construction, from the preparation before construction to the completion of the construction, to the final acceptance after construction. How to do a quick and good measurement of the line, is a basic technical skills and test the basic requirements.
Do the measurement before the commencement of the end
Before the start of the project, the survey and design units shall be responsible for on-site surveying and settlement according to the design documents, and the site standard point, conductor piles and crossing point piles shall be clearly identified according to the design drawings. Within the measurement of signs, must take appropriate protection measures. On the measurement of the end, it is necessary to emphasize the protection of pile position, that is, in the design unit after pile, should be timely use of brick piers or pouring cement pier and other methods to be protected, so as not to lose. These piles are generally farmland or residential areas, it is easy to be man-made destruction, and once destroyed, let the survey and design units to fill test, then delay the construction, but also increase the cost.
Midline retest and edge loft
Center line measurement is based on the alignment measurement, the road center line plane position on the ground marked in detail. It is the difference with the alignment measurement is: alignment measurement, but the intersection of the road and the straight line segment of the necessary turning point marked out, and in the midline measurement, according to the intersection and the turning point with a series of stakes will road straight Segment and curve segments are specified in detail on the ground.
The alignment survey is usually carried out by the survey and design units, and then the pile and measurement results to the construction side, the construction unit by the middle line and construction measurement.
Subgrade construction should be fully restored before the center line, according to the restoration of the pile in the road and the relevant provisions of the roadbed side of the pile. On the midline re-measurement and edge lofting, should pay attention to the following points;
One should pay attention to the distance between the intersection, the direction is consistent with the drawings; such as an engineering project has several tenders, should pay attention to the center of the adjacent tenders are closed, midline measurements should be in-depth adjacent tenders 50 ~ 100 M; attention should be paid to the center of the structure such as bridge and culvert is closed; should pay attention to the relative position of the building and other buildings and drawings are consistent. If you find problems in a timely manner to identify the reasons for the design unit.
Second, retaining pile set. It is very important to set up pile protection pile in the middle of the road, but these piles are easy to be destroyed during the construction. Therefore, it is necessary to carry out the restoration and surveying work of the middle pile during the construction of the roadbed. In order to quickly and accurately restore the center pile in the original position, must be on the road before the construction of the main control point of the pile such as the intersection point, turning point, curve control points set up retaining pile. The so-called retaining pile, is outside the scope of the construction is not easy to be destroyed where some stakes set up.According to these pile, with simple methods (such as the intersection point, range, etc.), you can quickly restore the original pile point.
Set the pile should pay attention to the following aspects: in each straight section of the road, at least three control piles to set up retaining pile, so even if there is a control pile can not be restored, the other two points can be used to restore the straight section To the original position; the intersection angle of the two direction lines as close as possible to 90 °, should not be less than 30 ° angle of intersection; retaining pile should be selected outside the scope of construction, but not too far away; Pile distance can not be too far; The retaining pile must be solid and reliable, pile to facilitate the erection of measuring instruments and observation.
Set up retaining pile of curve side. For the curve segment, because of the more difficult to determine the side of the pile, re-measuring time-consuming more, so after a precise line, the edge of the curve section of the pile pile should also be set representative pile, which can reduce Repeat the measurement, reducing the measurement workload.
Third, the laying of mileage pile. After the midline pile is fixed, it is possible to lay out the control pile of the mileage pile on this basis. Mileage pile layout principle is: in the straight section, generally arranged in every 100 meters of the entire pile of cross-section, similar to the common road construction 100 meters pile layout; in the curve section of the pile to be properly encrypted, in the curve Mileage pile can be large stakes, above the mileage mark with paint or ink station, into the road outside the scope of construction on both sides of the ground, it is best to play on each side of a . To ensure that the construction is not easy to damage the case, from the embankment edge should be as close as possible to facilitate the use, generally 1 to 2 meters.
The laying of mileage piles is not addressed in most of the surveying and setting-out sections of the Construction Manual, and is not taken into account at many sites. I found in some sites, some construction technicians in the construction survey, the determination of the distance station is a long distance from a foot a foot row over, not only a waste of time and prone to cumulative error. If the mileage stakes are not allowed, then the elevation, slope quality control is out of the question.
Third, the proofreading and additional standard point
First, the use of design units set up before the standard point should be carefully checked, close the gap may not exceed the limit, such as exceeding the allowable deviation should identify the reasons and promptly reported to the relevant departments. The design unit delivers the leveling points normally set several months ago. These points in the field can easily be man-made collision or natural subsidence due to the ground changes, so be sure to carefully review before use; Second, the standard point of additional principles: the distance is generally 150 to 200 meters, Plus transfer station for the principle. The additional standard point should be closed with the design unit to pay the standard point, such as an engineering project at several tenders, but also with the adjacent standard segment of the standard point of closure, the closure may not exceed the limit.
The position of the leveling point shall be located on a solid, non-sinking, non-touching ground or a solid building of a permanent building. Can also be installed in the protection of deep-buried wood piles or concrete piles, and make clear signs. The leveling point should be checked once a month, and the level of the spot where the movement is suspected should be checked after re-inspection.
Vertical and horizontal cross-section measurement
Through the midline re-test, side piles line and the laying of the standard point, you can measure the vertical and horizontal cross-section. The main purpose of vertical and horizontal cross-section measurement is to calculate the amount of earth, so the vertical and horizontal cross-section measurement after the end of the measurement results should be checked with the design drawings. Where the results with the original within the allowable deviation, the original results shall prevail, and only when there are significant differences with the original results, can be reported to the supervisory engineer after verification changes. It should be noted that: the work must be carried out before construction. If the measured amount of earth and the design does not conform to the supervision of the approval should also be carried out before construction.Some site excavation to the supervisor before the actual amount of earthwork and design does not match, require additional visa, but the final supervision refused.So be sure to pay attention to the timeliness of the work.
測量員英文自我評價 篇2
Time off quickly, blink of an eye, I went to Hengyuan company project department, has more than six months.In these days, success, failure, joy, and distress. In the leadership of the care and guidance, colleagues in the full support and help, my ability to work has been greatly improved.
From the unit, I know their own shortcomings and the direction of the effort, now in the project department engaged in the measurement of construction tests and so on. In addition to the work of the Ministry of Construction, , To learn more about my colleagues work knowledge and communication. I know that their experience and experience are inadequate, practice is also very flawed, but do not know I asked, and access to information and drawings, colleagues in the office and the leadership of the help, feel that they learned these days Many, every day is full. Now the work of these days to do a self-assessment.
1, 1, to study hard and continuously improve professional competence. At work, serious study of professional knowledge, practice and theory will be combined, continue to accumulate experience, a lot of professionals, technical staff advice, and constantly enrich themselves;
2, abide by the rules and regulations, these days, their work is not afraid of hardship, not afraid of tired, learning excellent staff approach, more to see more to listen to more questions, carefully to complete the construction test of the work tasks; , Unity of colleagues, work together, colleagues, harmonious relations, unity and fraternity, mutual help, mutual respect and understanding;
4, due to their lack of work experience in the work of the lack of practical experience, quality inspection work done inadequate, through the subsequent accumulation of learning and practice, and more to my colleagues to learn, this is my future work to make good efforts direction.
Second, the attitude in the professional, everyone has a motivated heart, I not only work for the company, working for the boss, I work for themselves, I believe they can do a very hot heart, a pair of very Hard - working hands. On the one hand I should not rigidly adhere to some things, to be good at breakthroughs, creative ideas, but also to the overall situation, the team as the most important, can not be too personal. And then later in the process of doing things to pay attention to the method, so as to make work more efficient and reduce unnecessary duplication of work, things will do better. In the professional field, I have been working in the project department of the company. With the help of my colleagues, I have gained more and more knowledge through professional efforts and work experience.
3, review these days, I seriously study the professional knowledge of road and bridge, study diligently, wholeheartedly, courteous, warm, patiently answer the problems in the work, and in practice to improve their quality and professional level, and strive to grow As a qualified Hengyuan employees. These days, let me on their own jobs and the company's advantages of resources, have a more profound understanding and understanding, which can be more quickly adapt to their jobs, give full play to their initiative, in the future work andLife, I believe that through their own efforts, in the future work, I will grow into a professional and responsible staff, to become the object of learning for others to contribute to the company. With the increase in their working days, to achieve their goals, reflecting the value of their lives, and the company grow together. I will use modest attitude and full of enthusiasm to do my job, create value for the company, with the company to look forward to a better future!
測量員英文自我評價 篇3
Two weeks of measurement practice, I got a more comprehensive, systematic exercise, but also learned a lot of books can not learn the knowledge and skills.
I remember the first week of internship, we are very excited, a week down we feel very relaxed, rest for two days, began measuring practice, I followed the teacher to find the control point, then everyone is still excited, that the next Of the week should also be very easy, it is not.Although a bit lucky, but we all learn a lot, only a lot of ordinary "a lot of shopping" to learn things. I like to think, like the summary, so I summed up the following points:
Grow up, to try to take some responsibility. We are born with a kind of inertia, whether individuals, or a team, if it is in an inert atmosphere, that she (people) efficiency will not be high, but if everyone has a strong sense of responsibility, Take some responsibility, then the efficiency is not only improved, and the task will be completed very well.
Infectivity is very important. In a team, in order to have a good atmosphere, the first person to put forward the idea of thinking is very important, because later people can not help but have a herd mentality. If he (she) the idea is positive, then someone will actively think of some problems. On the contrary, the whole team into a negative atmosphere. Therefore, each of us should actively think about the problem.
Think a lot. What is the internship, internship is the theoretical knowledge into their own knowledge of the process. Internship process only a lot of thinking, in order to digest a lot of knowledge, but also extends a lot of previously unknown. Teamwork, through thick and thin. This is a cliché, but in this practice have to mention, because it is everywhere, remember very clearly that many times we are on the measurement site for lunch; is that we all get up early, and then in the cold Whiz in the operation, everyone in the trembling; we are carrying the instrument touched the black home. All this bitter and happy, we all bear together. Through thick and thin, we are happy! Learn to compromise. Compromise is the highest art, in the process of cooperation, inevitably there will be some conflicts, then we need to calm down to think about the solution to the problem, everyone has done some concessions, then things are easy to solve.Do the most "humble" work, tree arrogant self-esteem. A good team, everyone needs a little hard work, not afraid of dirty, not afraid of tired, rather than pushing three or four. Only everyone is actively doing everything, in order to achieve the purpose of the internship, so that everyone is familiar with every aspect.
To calm. Whether doing things or a man, we should learn to calmly face. Remember half of the picture, the teacher pointed out that we are wrong method of mapping, we have thought would be wrong; remember the distance with a tape measure we have thought about measuring only once. But in the end we did not do, now think of it, this is right! Frankly, is what we want life.
Internship is completed, the internship is the most unforgettable day of my life, very afraid of the beginning, and now want to come, the day is over, and can get good interns, so get a revelation: no matter what difficulties,Do not lose confidence in yourself.
測量員英文自我評價 篇4
As a unit of a cashier, in charge of the company's daily income and expenditure, self-inductance work pressure, so at work on their own requirements are very strict, careful effort, so since joining the work, especially in social leadership and colleagues Care and support, to consciously abide by the country's financial policies and regulations, strictly implement the tasks assigned by higher authorities, conscientiously perform their duties, and strive to complete their work, has not been a big mistake. The following is my work identification:
First, abide by the rules and regulations, perform job responsibilities.
In the cashier work, be able to adhere to the daily business at the end of serious rolling cash income, pay the amount of the registration book, the amount of money to pay the cash register, double the counter, double tube library 'requirements,' self- And check with the cash inventory to ensure that the cash inventory and the actual inventory of cash, general ledger balance, consistent with the accounts do, accounts match. To seriously deal with the size of the RMB currency, the exchange of damage currency business, the whole point to be accurate, pier Qi, pick the net, tied tightly, seal clear, timely check on the water accounts and cash receipts and registers. In strict accordance with the vault storage system, do a good job in the Treasury of the custody of the Treasury in charge, with the same into the same.
Second, forge ahead in unity and work together to create a good working environment.
"Solidarity with others, and people are good" has always been my criteria for others. In the work, to unite colleagues, live in harmony, learn from each other, promote each other; in life, help each other, mutual concern and work together to create a harmonious atmosphere. At the same time, continue to self-positioning, update their ideas, improve service awareness, enhance service levels.
Third, enhance awareness of prevention, the implementation of the "three anti-one."
Security aspects. Work more and more, I can continue to enhance the sense of security precautions, the duty period to keep strictly in accordance with the "three anti-one" requirements, conscientiously implement the preventive measures, memorize anti-theft anti-riot plan, master, Kinds of prevention equipment, do a good job "three" anti-lock check. Often check the circuit, the phone is normal, to prevent the performance of the device is in good condition, when the abnormal situation can be handled on the spot on the spot processing, can not deal with the initiative to the upper reporting, etc., can always keep a clear head, enhance security awareness , And to ensure that the 24-hour duty-bound to keep out of control, to protect the credit of the property security.
Fourth, strengthen theoretical study, improve their overall quality.
Over the past year, I have been able to take the initiative to study the country's financial policies and regulations and the spirit of the document issued by the association, strengthen ideological and moral construction, improve professional training, establish a correct outlook on life and values; to strengthen their sense of love and dedication To cultivate, to further enhance the sense of responsibility, dedication to the spirit of ownership of their own work, so that "dry line, love line, special line", firmly establish the "social Xing Xing I, To fully establish the "customer first" service concept, the quality of civilization as a measure of the work of the standards to strict demands on themselves, and consciously accept the supervision of our customers regularly carry out criticism and self-criticism, and strive to be a To participate in credit cooperatives to actively participate in various learning and training activities, conscientiously do study notes, and in practical work to be used in their spare time, self-study undergraduate courses, to participate in distance education examinations, for betterTo adapt to the needs of each job to lay a good foundation.
In short, the understanding of their work to have a higher awareness, and constantly strengthen themselves, improve work efficiency and accuracy, although in this regard there are still many deficiencies, such as financial accounting knowledge is not enough, the unit reform to beFurther understanding, etc., but I believe that the leadership of the care and support at the next level, with the enthusiastic help of colleagues, I will certainly do a better job stable and better for the new year will have better results.
測量員英文自我評價 篇5
I am from 20xx × year × month into this company, to date has been three months, by three months to understand and learn, I have mastered my work to be done. Now the work of the three-month identified as follows:
First, pay attention to the very old colleagues around learning at work everywhere watching, see more, more thinking, more to learn at a faster rate familiar with the company, better integrate into our community this.
Second, at work, good at thinking, found some problems in the handling of documents, it is first of all to communicate with colleagues and share their ideas with colleagues to solve, can be resolved to get rid of, can not be solved submitted superiors, and proposed reference their views
III. Enthusiastic colleagues answer questions asked. I think we have the ability to improve, our company will increase overall
In short, after a trial period of three months, I think I was able to positive, proactive, skilled to complete their work, be able to identify problems in the work, and actively cooperate fully require the company to start work with colleagues can be very good cooperation and coordination. In future work, I will always, people: with people, to work: strive for perfection, and constantly improve their level and the overall quality of the company's development to do their part.
我是從20xx年×年×月進入到這家公司的，到今天為止已經三個月了，通過這三個月來的了解和學習，我已經熟練掌握了我所要做的工作。現將這三個月的工作情況作如下鑑定:
一、非常注意的向周圍的老同事學習，在工作中處處留意，多看，多思考，多學習，以較快的速度熟悉著公司的情況，較好的融入到了我們的這個團體中。
二、在工作中，善於思考，發現有的單據在處理上存在問題，便首先同同事進行溝通，與同事分享自己的解決思路，能解決的就解決掉，不能解決的就提交上級，同時提出自己的意見提供參考
三.熱心回答同事詢問的問題。我認為大家的能力都提高了，我們的公司才會整體提高
總之，經過三個月的試用期，我認為我能夠積極、主動、熟練的完成自己的工作，在工作中能夠發現問題，並積極全面的配合公司的要求來展開工作，與同事能夠很好的配合和協調。在以後的工作中我會一如繼往，對人：與人為善，對工作：力求完美，不斷的提升自己的水平及綜合素質，以期為公司的發展儘自己的一份力量。
測量員英文自我評價 篇6
Passionate, cheerful personality I, good psychological quality, life, work optimistic, sincere, frank, good interpersonal relationships, can endure hardship, have strong adaptability and self-learning ability, not susceptible to external environment interference.
In learning, I have good grades, many times to be rewarded. In the study of professional knowledge, but also pay more attention to the combination of theory and practice. The use of spare time to learn the food industry related to other content, so that knowledge can be adapted to social development.
At school, I have been a student cadre, a strong sense of responsibility, a strong organizational skills, leadership and a good team spirit.
I have a wide range of interests, like reading, listening to music, sports, participated in various cultural and sports activities in various schools and colleges of activities to achieve good results.
測量員英文自我評價 篇7
Time off quickly, blink of an eye, I went to Hengyuan company project department, has more than six months.In these days, success, failure, joy, and distress. In the leadership of the care and guidance, colleagues in the full support and help, my ability to work has been greatly improved.
From the unit, I know their own shortcomings and the direction of the effort, now in the project department engaged in the measurement of construction tests and so on. In addition to the work of the Ministry of Construction, , To learn more about my colleagues work knowledge and communication. I know that their experience and experience are inadequate, practice is also very flawed, but do not know I asked, and access to information and drawings, colleagues in the office and the leadership of the help, feel that they learned these days Many, every day is full. Now the work of these days to do a self-assessment.
1, 1, to study hard and continuously improve professional competence. At work, serious study of professional knowledge, practice and theory will be combined, continue to accumulate experience, a lot of professionals, technical staff advice, and constantly enrich themselves;
2, abide by the rules and regulations, these days, their work is not afraid of hardship, not afraid of tired, learning excellent staff approach, more to see more to listen to more questions, carefully to complete the construction test of the work tasks; , Unity of colleagues, work together, colleagues, harmonious relations, unity and fraternity, mutual help, mutual respect and understanding;
4, due to their lack of work experience in the work of the lack of practical experience, quality inspection work done inadequate, through the subsequent accumulation of learning and practice, and more to my colleagues to learn, this is my future work to make good efforts direction.
Second, the attitude in the professional, everyone has a motivated heart, I not only work for the company, working for the boss, I work for themselves, I believe they can do a very hot heart, a pair of very Hard - working hands. On the one hand I should not rigidly adhere to some things, to be good at breakthroughs, creative ideas, but also to the overall situation, the team as the most important, can not be too personal. And then later in the process of doing things to pay attention to the method, so as to make work more efficient and reduce unnecessary duplication of work, things will do better. In the professional field, I have been working in the project department of the company. With the help of my colleagues, I have gained more and more knowledge through professional efforts and work experience.
3, review these days, I seriously study the professional knowledge of road and bridge, study diligently, wholeheartedly, courteous, warm, patiently answer the problems in the work, and in practice to improve their quality and professional level, and strive to grow As a qualified Hengyuan employees. These days, let me on their own jobs and the company's advantages of resources, have a more profound understanding and understanding, which can be more quickly adapt to their jobs, give full play to their initiative, in the future work andLife, I believe that through their own efforts, in the future work, I will grow into a professional and responsible staff, to become the object of learning for others to contribute to the company. With the increase in their working days, to achieve their goals, reflecting the value of their lives, and the company grow together. I will use modest attitude and full of enthusiasm to do my job, create value for the company, with the company to look forward to a better future!
測量員英文自我評價 篇8
In the twinkling of an eye, one year's work is spent in a tense and busy, the new year new starting point new opportunities and new challenges, I will work harder to learn, will improve my ability to work, do not live up to you Expectations, I will strive to do their jobs.
Since taking part in the work, I earnestly complete the work, study hard, think positively, individual ability rises gradually. I am thinking, learning, work has made new progress, but I also recognize that they have too many shortcomings, theoretical knowledge and low level of operation, skills are not strong. As a qualified operator, we must learn the rules of production equipment operating procedures, process safety knowledge and process parameters. Outside the loading operation process to pay attention to many things, no small mistake, there will be a big life-threatening risk of loss of economic dime, so everyone should take their own work to do to ensure safety in production . (Internal control of the job is very important, single-system, data, audit, monitoring, communication, communication, do not take five and so on.Three check six pairs, check the driver tank volume table, pressure filling certificate, dangerous transport certificate ). In addition, the train is running fast also rely on the front, because just to work soon, in terms of experience, or from thinking there are many shortcomings in these areas I got the company leadership, department heads and the squad leader of the correct guidance, The dragon is to carry out job training skills training, so that we have a better chance to improve their theoretical knowledge of security and operational skills, in the learning process, I have a lot of uncertainty, we always patiently explain to me, I would like to express my heartfelt gratitude to all of you.
In short, into the company has more than a year (in the car loading unit under the leadership of Master Ke) along the way, enjoy the pain over, but also the luxury of happiness, no credit also has elbow grease, but either laughter or tears, Working for life, working for our dreams, we are brave to face a lot of difficulties, I think these will be the growth of each of us to the glorious stage of bit by bit.
upcoming, future work may be more difficult, more and more competition will give us a great deal of pressure, as long as the heart relaxed, the pressure into motivation, this is what we have been continuous progress Of the common ground, with the share .
測量員英文自我評價 篇9
I warm and cheerful personality, friendly, honest and humble. Hard-working, serious and responsible, hard working, conscientious, patient. Affinity, approachable, good communication. Study hard seriously, with outstanding results. Actively participate in extracurricular sports activities, a variety of social practice and part-time work, in order to increase their experience and improve their capabilities. Experience in the way things work, exercise eloquence and interpersonal skills. In normal school life, I have done a lot of part-time. For example: tutoring, telephone interviewers, restaurant waiters, leaflets, questionnaires, also played summer jobs to the plant, to experience a different way of doing things and the various operational procedures work, exercise has become a hard-working spirit, and from work to appreciate the joy and dedication.
測量員英文自我評價 篇10
Since the car mechanic qualification in 20xx, has always been in line with the line, love line, fine line of work attitude, with full enthusiasm, and strive to forge ahead. In the work abide by the "product quality is the life of the enterprise," the creed, deeply shoulder the heavy responsibility to deal with strict self-discipline, meticulous and strict quality control, in strict accordance with the operating procedures and quality requirements for production, the work is summarized as follows: Work tasks in the work, the ideological, on the one hand, pay attention to political theory study, and strive to improve political literacy, on the other hand to strengthen the business knowledge of learning, improve operational capacity. In the leadership of the guidance and the support of colleagues with the help of a planned conduct of the theoretical knowledge and the study of turning technology. Seriously do a good job within the division.In doing this work at the same time I also submitted to the party to join the party application in daily life, work, I have been asked to ask a party member himself, and strive to learn what they have learned through, borrow "car mechanic practical manual "And other books, give up a lot of rest and entertainment time, study hard, and constantly improve their level of business theory. I always adhere to the business knowledge to be applied to the production of flexible, to apply their knowledge, combined with their many years in the practice of turning the practical experience to master the rules of the problem, to explore a set of practical production and easy to learn Found the problem of skills, improve the accuracy of the operator and work efficiency has played a significant role in helping, 1.5 sequence round table milling machine processing part of the fillet at the traces of the steps, affecting the quality of parts. The reason is because the fixture locking force is not enough, through repeated tests, repeated debugging Zhang angle, and ultimately eliminate the step problem. 2.35 sequence drilling machine tooling due to bad processing, with the technical staff actively ideas, think of a way to solve the tooling of the processing problems.
測量員英文自我評價 篇11
Since July 21 joined Road Equity Investment Fund Management Co., Ltd., with the leadership and colleagues in the company's teaching, training and help, making me in the ideological, work, study all aspects have been improved to varying degrees. Some of the previous work experience and school-related exercise in the work I have engaged in this now have some help, but many things need to re-understand and experience. Learning and practice can produce results of mutual integration, which are inseparable from the patient leadership unit of instruction and intangible body and mind, which I sincerely express my gratitude. Now my probation period since the relevant work summary is as follows:
1. Reimbursement: in strict accordance with the requirements of the financial system, handling expenses reimbursement matters, handling cash, online banking, check the receipt and payment business, so that the cash Nissin statements, reimbursement accurate, and special circumstances, special treatment.
2. Software accounting: timely registration in the financial software, cash, bank accounts, accurate receipt and payment, and regular checks with bank accounts.
3. Statement: according to the weekly capital statements, according to the needs of the preparation of balance sheet.
4. Cash, bills, check and document management: cash and notes management properly, perfect, notes and documents received in time registration, so that evidence to follow.
5. Payroll: the monthly payment of wages in a timely manner and accurate.
6. Banks matters: the daily banking business, mainly including the use of reserve funds, bank account opening, financial products to purchase, the public \ private money receipt and payment, the end of the month and the beginning of bank statements print, bulk card, credit card And so on with the bank docking matters.
7. Fixed asset management: do software card entry timely, accurate, when the physical inventory inventory, and regular inventory.
8. Financial-related system modification, layout, according to the company's financial system documentation, the production of financial expenses reimbursement process (visio diagram) and the corresponding PPT.
9. According to the business center needs, leadership requirements, collect and organize the financial analysis of the data required to produce the appropriate chart and formatting.
10. Timely and efficient completion of the leadership of the other tasks, to help other departments do the relevant financial work.
After three months of probation, I learned a lot at work. Financial cashier work seems to be simple, but it needs to do a lot of careful and patience, but also need to be cautious. For each sum of money for reimbursement, carefully, strictly in accordance with the company's financial system, and in accordance with the procedures for the implementation, in case of special circumstances are special treatment to ensure the normal operation of the company. To make cashier work can not use the "easy" to describe, it is the first line of financial work, financial revenue and expenditure of the juncture in the company's management plays an important role. As a qualified cashier, must have the following basic requirements: First, learn, understand and master the policies and regulations and company system, and constantly improve their level of business and knowledge and skills. Then, cashier personnel to abide by the good professional ethics. Second, the cashier must have a strong sense of security, cash, notes, all kinds of seals, it is necessary to have the internal custody of the division of responsibility, but also to contain each other.Finally, good communication skills, especially for others to explain or convey the relevant financial matters, good communication and expression can reduce the number of unnecessary unnecessary misunderstanding, greatly improve efficiency. Of course, in many ways, due to their professional knowledge, ability limitations, there are still some deficiencies in the future work in addition to abide by the above basic four points, I will continue to study hard to improve their professional skills, To adapt to the changing social environment and future work carried out by the company, with the times.
These are my three months of this work I have some experience and summary. In the future work and study I will make unremitting efforts to do their own work, and the road with the company's development in sync. At the same time actively assist others, the common development for the company. I sincerely thank the company leaders and colleagues for their support and concern in their work and life. I also earnestly ask the leaders of the company to give me a chance to continue to exercise and realize the ideal. I will use modest attitude and full of enthusiasm to do my own work, create value for the company at the same time, so that their own towards a higher level.
測量員英文自我評價 篇12
6, I am a serious and responsible attitude towards work, good communication and coordination have strong organizational skills and team spirit; lively, cheerful, optimistic and motivated, caring and good at teaching parallel; self-motivated, eager to learn can continuously improve their ability and overall quality. In future work, I will be full of energy and assiduously the spirit of hard work, steadily improve their ability to work, the simultaneous development of enterprises.
測量員英文自我評價 篇13
Passionate, cheerful personality I, good psychological quality, life, work optimistic, sincere, frank, good interpersonal relationships, can endure hardship, have strong adaptability and self-learning ability, not susceptible to external environment interference.
In learning, I have good grades, many times to be rewarded. In the study of professional knowledge, but also pay more attention to the combination of theory and practice. The use of spare time to learn the food industry related to other content, so that knowledge can be adapted to social development.
At school, I have been a student cadre, a strong sense of responsibility, a strong organizational skills, leadership and a good team spirit.
I have a wide range of interests, like reading, listening to music, sports, participated in various cultural and sports activities in various schools and colleges of activities to achieve good results.
測量員英文自我評價 篇14
I think the first task of college students or learn cultural knowledge, so I learn in the sense, not to relax. I think a good learning method is very helpful to learn the knowledge, so every day after learning, I will summarize the learning experience. A hard one harvest, often see their achievements in progress, I will sigh as long as you have the determination, nothing is impossible. For students of our computer-related majors, the knowledge of light optics is not enough.
I use the spare time often read computer class books, and participated in a number of computer-level qualification examination, and achieved good results. I think that learning is the student's occupation, the occupation also need to have wisdom, perseverance and perseverance. In today 's fast - growing information age, I We only learn new knowledge, we will not lag behind! Overall, this semester for their achievements or decent. Single digital image processing Although this course did not learn too much of the content, but also on its basic principles have a certain understanding.
測量員英文自我評價 篇15
As an accountant, in all aspects of business are careful about, patience, enthusiasm. Since the work, due to their continuous efforts, in all respects have made great progress. Work is also a successful completion, and now the individual identification is as follows:
First, have good work skills
Cashier external units more settlement, is an image window; internal is a service window, internal staff reimbursement is frequent, is a masters. So I have to do is not confused, tickets on the spot error-free, inventory cash fast and accurate, not only to grasp the financial policy, dry up the work also handy, have strong operational capacity, plans, computer, Money everything is accurate, busy and not chaos.
Second, the sense of innovation
In the eyes of many people is a major invention of innovation is what, it is not true, as long as the actual work from the start, to improve the actual work, to promote practical work to a new level, is innovation. I have this spirit. I work for the staff reimbursement of travel expenses reimbursement and the original invoice paste sheet, are made through my reasonable proposals after the improvement of the voucher paper size selection, the original document paste single filling format, the original paste single Requirements of the content design, font layout requirements, the back of the original paste paste the attention of managers, not only to improve the work, more importantly, is to put the accounting file binding and management.
Third, there is a responsible attitude
1, the strict implementation of cash management and settlement system, regular checks to the accounting cash and accounts and found that the amount of cash does not match, so that timely treatment.
2, the timely recovery of the company's income, out of receipts, cash withdrawals in time to the bank, never sit cash.
3, according to the basis for providing accounting, teaching staff wages and other timely payment of funds to be paid. I am hard working, willing to endure hardship, willing to sacrifice. This year, due to the overall relocation and standardization of the basis of accounting rectification work, the intensity and difficulty of financial work has increased. In addition to complete the reimbursement work, I also take care of Corey's back office work and other business. In order to complete the task according to the quality and quantity, I do not care about personal gains and losses, not pay, sacrifice personal interests, often work overtime. In work to develop willing to endure hardship, willing to sacrifice the spirit of the work can always be hard working, conscientious. In the completion of the task of reimbursement, taking into account the back office, do a good job budget, the management of labor camp deposits, excellent work to complete the task, played a role in advanced and role models.
測量員英文自我評價 篇16
High the next semester of life has officially opened the curtain. I want to combine the recent situation in the development of a learning goal: first, reasonable time, adjust the schedule, assign good learning, work, entertainment time. Second, the quality and quantity to complete the assignment of the teacher, the teacher assignments are generally her years of teaching experience in the summary, with high value, ... ... earnestly take the exam, exam carefully reviewed. In addition, actively read the books and information, to expand their knowledge; often ask questions, discuss with students, to seize the time to learn some other areas of professional knowledge, knowledge is always useful.
測量員英文自我評價 篇17
101 middle school has its strict school rules and discipline, the purpose is to let us become a good moral character and good students. I have been very loose in the junior high school period, but in 101 after I realized that as a student should have the character, from school to now, I have been strict self-discipline, abide by school rules and regulations, actively take the initiative for the school, To do a compliance 101 people.
I love the motherland in school, respect teachers, unite students, helpful, is a good helper teacher, the students good friends. I study diligently, positive, like and students to discuss and solve problems, often participate in class school organization of various inside and outside activities.
Of course, I also deeply aware of their own deficiencies, the word is not very good to write, and sometimes things will be only three minutes of enthusiasm, I believe that as long as overcome these problems, I can do better.
I can consciously abide by the rules of secondary school students, and actively participate in various activities, respect teachers, and students live in harmony, love and love the collective, willing to help others, labor actively and willingly, consciously exercise, and often participate in and organize class school organization of various classes activity.
I have good character, cheerful, love life, have a strong practical ability and organizational skills.
測量員英文自我評價 篇18
20xx is coming, recall the past 20xx, a sense of almost thousands.
During this period to seriously comply with the rules and regulations of the new group, love plants such as love home, but also at work
Constantly strict demands on themselves, with the Ministry of the production process work, the layout of the leadership to complete the various tasks. Diligent and enterprising, innovative, and continuously improve their work efficiency and found that the work of the problems in a timely manner to report to the leadership and seek solutions to the company's development and make greater contributions.
First, study with great concentration, conscious temper.
Although I took the forklift driving license is not long, just started, the operation is not particularly skilled, but in the course of my study, and consciously temper. After 3 months, I have been able to carry out skilled operation control, posts for three months to basically no mistakes, the ability to work has been greatly improved. For the future to complete the work to lay a solid foundation. I will continue in the next work, to further improve my professional level, at the same time to do a better job.
Second, strict requirements, love and respect their jobs.
Work in strict demands on themselves, diligent, love and respect their jobs, do not bow before difficulties do not back in front of the work, high-quality completed the work. In future work, I will humbly ask experienced instructors, and constantly sum up experience, to make up for their own deficiencies. At the same time, continue to learn a variety of theoretical knowledge and professional skills for the company's contribution to the development of their own strength!
Third, strengthen training, improve operational skills.
In order to do their work well, I make full use of limited time, strengthen the operation skills training, improve the efficiency of loading and unloading operations to ensure the safety of loading and unloading operations.Like trucks, before the operation must be loaded with the number of pieces of goods, specifications for serious study to determine the code put standard, so as to ensure the volume filled with the vehicle. I remember the beginning of forklift operations, I have flip twice.Since then, I have to strengthen all aspects of skills training, and achieved good results, summed up a set of forklift driver training methods.
Fourth, diligent in the repair, security protection.
As a driver, always bear in mind the important task of their own to ensure that leaders and comrades ride safety as their responsibility to maintain a high degree of concentration in the driving, and in strict accordance with the operating rules and road traffic rules, do foolproof. A little free, they studied with great concentration all kinds of traffic laws and regulations, compliance safety driving.Often read the traffic book, will be a variety of traffic routes memorize in the heart, driving in detours, less bad road, fuel-efficient festival. In the vehicle repair and maintenance, when a good "doctor" and "beautician" the dual role of the vehicle ground maintenance, ground maintenance, ground cleaning, skilled master of various vehicle technical performance, failure to remove, the vehicle is always in good condition status.
In the work of 20xx, although achieved certain achievements and progress, but the problems can not be ignored, such as: their own quality to be further improved, the sense of service to be improved and so on. In the future work, I will try to make up for these shortcomings, and comprehensively improve their overall quality, business level, quality of service.
Some people say that the choice of the driver on the choice of hard work, I will certainly be with the future of the hardship of the professional partner, but I will not regret it, because I am willing to pay for the cause of my enthusiasm, , I am willing to love this dedication to all the work.
測量員英文自我評價 篇19
High the next semester of life has officially opened the curtain. I want to combine the recent situation in the development of a learning goal: first, reasonable time, adjust the schedule, assign good learning, work, entertainment time. Second, the quality and quantity to complete the assignment of the teacher, the teacher assignments are generally her years of teaching experience in the summary, with high value, ... ... earnestly take the exam, exam carefully reviewed. In addition, actively read the books and information, to expand their knowledge; often ask questions, discuss with students, to seize the time to learn some other areas of professional knowledge, knowledge is always useful.
I am in this semester, has been to comply with the rules and regulations of the school, has a good ideological and moral qualities, all aspects of outstanding performance, a strong sense of collective honor and sense of responsibility, adhere to the principle of seeking truth from facts.
In learning, I study the correct attitude, good use of reference and use of scientific learning methods, while focusing on independent thinking, the courage to explore.
On the moral character, I have a good moral cultivation, and a firm political direction. I love the motherland, love the people, firmly support the leadership of the Communist Party and the socialist system, abide by the law, love public property, unite students, helpful and pragmatic spirit, enthusiastic participation in school public service and patriotic activities.
In my spare time, I actively participate in physical exercise, dedicated to the construction of class services, and conscientiously perform the duties of the student union cadres, school life for the rich and colorful, pay attention to personal all-round development.
測量員英文自我評價 篇20
After a semester of baptism, I deeply feel that when a teacher is not simple, being a teacher is not simple. Require an infinite love, patience, and more importantly, such as needle-like fine mind can create transfer children thrive good education environment.
Class work is work manager, I face is vibrant, thinking, feeling, a strong desire for self-expression graders, so a semester, give me the most intense experience is: class teacher work have both macro management group, but also a micro personality development; also have a strong forward-looking; to work more meticulous in place, the only way to make the overall development of students in health class. As a first grade teacher, I am against our class lively features, do the following work:
First, strengthen general education, training the children's consciousness.
He recalled the case of the first month of school, and is more difficult. Day, such as "hen hatching" Usually sitting in class. From sit-stand, raise their hands, queuing, dining etc. You teach from. A week later, the students gradually learned when every day as anything. So, I combine the work of planning, the use of the morning meeting, the class will equal time, from discipline, learning, health, safety, humanities, etc., the students standardization of education, so that they understand that what to do, not to do what things . Over time, the student code of conduct much progress has been basically adapted to primary school life.
Second, more recognition and more incentives to stimulate the child's self-motivated.
Daily morning reading lesson, I will encourage children to read the text in his own way, and in the course of the inspection tour, the students studying seriously big praise, class time called them before talk about the heart, admire their merits. Students' enthusiasm increase every morning reading lesson they learn from reading the text. Daily cleaning of classrooms and other habits, and I will follow the method of reward morning reading sessions and a comprehensive evaluation at the end of one week to, or have done well in all aspects of progress in certain aspects, in particular bad habits get rid of some, I will award them a star, they spur the use of the child's self-motivated. Praise the children see the class standings stars are particularly happy, and some of them even to the class in the morning to the time to be careful not to see the stars are out.
Third, and parents more contact, more exchanges and jointly promote the child's development.
I think that a person can not survive without affecting the family. The impact on the child's teacher and then a big, if not the response and cooperation of the family, must be weak in. So I often use when parents pick up the child, and parents communicate, to express their views on the child's education, reflecting the child's performance in school and to make some suggestions and so on.
Unknowingly passed a semester, the students into the school from now, we can say the children's progress is great, will learn, express, with teachers, students exchange, can take the initiative in health class, and some small when cadres have a kind of mold, and can compare and abide by the rules and regulations of the school.
Fourth, do the work of transforming backward students
Our class, there are a few underachiever. Accordingly, Conversion underachiever is an essential work of the teacher. I think of poor students should be given special care. To do ideologically non-discrimination, not emotionally tired, the attitude is not rude. Poor students to use their own piece of sincere love, go knocking on the door of their heart. To be good at discovering their shine. For example: in the classroom do not riveted honors, should give underachiever create conditions to encourage them to raise their hands to speak, be given prompt recognition, rewards, so that they can confidently face learning. Extracurricular active counseling, and more contact with parents for joint home-school students to create a good learning environment, but also to promote the class learning environment.
Fifth, often made with the classroom teachers to contact, to understand students' learning, collaborative student learning purpose of education is to stimulate interest in learning, hard to learn the will of the Church to learn, to learn all the subjects, and master academic burden on students amount.
Through the above working class students discipline, learning, health, daily behavioral norms and so have a greater change, education for the future work to lay the foundation. Of course, the working class is a science, you need to continue to explore, in the future I will continue to work, due diligence and do this work.
經過一學期的洗禮，讓我深深感到當一名教師不簡單，當一名班主任更是不簡單。需要無限的愛心、耐心，更要有如針般細的心，才能創造出讓孩子茁壯成長的良好教育環境。
班主任工作是管理人的工作，我所面對的又是朝氣蓬勃，有思想，有感情，自我表現欲強的一年級學生，所以一個學期下來，給我最最強烈的體會是：班主任工作中既要有巨觀的群體管理，又要有微觀的個性發展;還要有強烈的前瞻性;工作更要細緻的落實到位，只有這樣才能使學生在班上健康全面發展。作為一年級班主任，我針對我們班活潑好動的特點，做了如下的工作：
一、加強常規教育，培養孩子們的自覺性。
回憶起開學第一個月的情形，的確比較辛苦。每天如 “ 母雞孵蛋 ” 一般坐在班中。從坐站、舉手、排隊、用餐等一一教起。一個星期之後，學生漸漸地知道了每天何時當做何事。於是，我結合制定的工作計畫，利用晨會、班會等時間，從紀律、學習、衛生、安全、人文素養等方面，對學生進行規範化教育，使他們明白該做哪些事情，不該做哪些事情。時間一長，學生的行為規範大有進步，已基本上適應了小學生活。
二、多表揚多獎勵，激發孩子的上進心。
每天的早讀課，我都會鼓勵孩子用自己的方式朗讀課文，並在巡迴檢查的過程中，將認真讀書的學生大肆表揚，下課的時候把他們叫到面前談談心，誇誇他們的優點。學生積極性大增，每天早讀課他們都學習自讀課文。每天的教室打掃和其他的行為習慣，我也都會沿用早讀課的獎勵方法，併到一星期結束時進行全面評價，各方面都做得好或在某一方面有進步的，特別是壞毛病改掉一些的，我都會獎他們一顆星，利用孩子的上進心鞭策他們。小朋友看到班級中的表揚榜上的星星都特別的開心，有的小朋友甚至早晨到班級中來的時候都要認真的看一看星星是不是掉了。
三、和家長多聯繫，多交流，共同促進孩子的發展。
我認為，一個人的成長離不開家庭的影響。教師對孩子的影響再大，如果得不到家庭的回響與合作，必然是勢單力薄的。所以我經常利用家長接送孩子的時候，與家長交流，表達自己對教育孩子的看法，反映孩子的在校表現和提出一些建議等等。
一學期不知不覺過去了，從學生進校到現在，可以說孩子們的進步是很大的，會學習，會表達，能與老師、同學交流，能主動做好班上衛生，有的小幹部也當得有模有樣，並能比較自覺地遵守學校的各項規章制度。
四、做好後進生的轉化工作
我們這個班，後進生還是有幾個。因此，轉化後進生是班主任的一項必不可少的工作。我認為對後進生要給予特別的關愛。要做到思想上不歧視，感情上不厭倦，態度上不粗暴。要用自己對差生的一片真誠的愛心，去叩響他們的心靈之門。要善於發現他們的閃光點。比如：在課堂上不要緊緊盯著優等生，應多給後進生創造條件，鼓勵他們舉手發言，及時給予肯定、獎勵，使他們也能自信地面對學習。課外積極輔導，多與家長聯繫，爭取家校聯合為學生創造一個良好的學習環境，同時也促進班級學習氛圍。
五、經常與任課教師取得聯繫，了解學生的學習情況，協同對學生進行學習目的教育，激發學習興趣，培養刻苦學習的意志，教會學習方法，學好各門功課，並掌握學生的課業負擔量。
通過以上工作，本班學生紀律、學習、衛生、日常行為規範等都有了較大轉變，為今後的教育教學工作打好了基礎。當然，班主任工作是一門科學，需要不斷探索，在今後的工作中我將不斷努力，盡心盡責做好這一項工作。
測量員英文自我評價 篇21
1, political and ideological aspects
Adhere to the study of Marxism-Leninism, Mao Zedong (reproduced in: measuring professional work self-identification) East thought, practice "Three Represents", establish a scientific concept of development. Always strict demands on themselves, based on their own, assiduously business technology, and strive to do a good job. Listen to a variety of superior field, throughout the county to carry out measurement work, regardless of the working environment, can be consistent, perseverance to do their own work. Work hard, active, practical style, diligent in thinking, efficiency, and always maintain a strong sense of dedication and dedication, and actively contribute to the development of measurement work ideas, dedicated their meager strength.
Second, professional and technical work
Since I joined the work, I have worked hard to learn engineering knowledge and improve my job skills in order to meet the needs of my work. Through my own efforts and with the help of my colleagues and leaders, I have been able to work effectively and efficiently. Since taking office, I actively undertake the work of engineering surveying tasks, can be done conscientiously, the successful completion of the tasks assigned by the organization, never for their own private affairs affect the normal work, and actively participate in the organization of the activities. The following are the major tasks that have been completed since my appointment:
1, according to the county party committee and government requirements to complete the county key town topographic map measurement and county control planning topographic mapping measurement; 2, since 20xx to complete the county 21 townships new community, farmer settlement survey work;
3, the synergy to complete the county key projects and investment projects related to measurement work;
4, completed the industrial park and the backup industrial park topography measurement 18 square kilometers;
5, the completion of the municipal government issued a special standardization of the topographic maps, map measurement work;
6, to complete the county key road Avenue, Avenue, Road, Avenue vertical and horizontal cross-section measurement, strip chart measurement;
7, coordinated the completion of the county control network encryption and cors station construction;
8, to complete the footwear industrial park, Sands commercial center, building materials market and other urban and rural integration projects to promote the work of measurement. In order to better adapt to the measurement work, and strive to do their own work at the same time. I attach great importance to continuing education and learning, and actively participate in various departments of the organization of laws, regulations and professional and technical training.
Third, the existing problems
Measurement and management related to the ability and level to be improved, not enough innovation. In future work, I will be more hard to learn, use the knowledge to strive to enhance the level of operational capacity, and constantly improve the working methods, improve the work.
For efficiency, down-to-earth, hard working, hard work, to become an excellent measurement of professional and technical personnel.
測量員英文自我評價 篇22
Communicative ability, eloquence and have better communication skills, be able to coordinate the handling of interpersonal relationships; focus on team spirit, strong organizational skills and coordination; the problem can deeply analyze and quickly make a judgment decision. Have a strong self-motivated, able to calmly face the challenges and overcome difficulties.
Man warm and sincere, optimistic, serious and responsible attitude, humble, has a good sense of time and the ability to adapt to and actively participate in various social practice to enrich themselves, their talents, tap their own potential. Full of team spirit, strong sense of the collective.