遊艇專業英語辭彙(C3)

 同軸電纜 co-axial cable (or concentric cable)
 共軸轉動 co-axial drive
 同軸輸送線(雷達) co-axial transmission line
 鏇塞 cock
 軟木碰墊 cock fender
 艉橋 cocking bridge
 艏艉部上蹺變形 cocking-up
 艉凹艙(小艇) cockpit
 惰輪 cock wheel (or idle wheel , or idler)
 椰皮墊 cocoa mat
 椰子油 cocoa oil
 椰皮墊 coco mat
 龜裂開口位移 cod (= crack opening displacement)
 化學需氧量 cod (= chemical oxygen demand)
 柴油燃氣渦輪 codag (= combined diesel and/or gas turbine)
 法規,代碼 )密碼 )章程 code
 電碼簿 code book
 信號旗 code flag
 號碼代字 code letter
 美國聯邦法規 code of federal regulations
 柴油燃氣渦輪組合機 codog (= combined diesel on gas turbine)
 係數 coefficient
 收縮係數 coefficient of contration
 動[力]黏度係數 coefficient of dynamic viscosity
 膨脹係數 coefficient of expansion
 肥瘦係數 coefficient of fineness (or fullness)
 波動係數 coefficient of fluctuation
 摩擦係數 coefficient of friction
 熱對流係數 coefficient of heat convection
 傳熱係數 coefficient of heat transmission
 [運]動黏度係數 coefficient of kinematic viscosity
 線膨脹係數 coefficient of linear expansion
 性能係數 coefficient of performance
 黏度係數 coefficient of viscosity
 膨脹係數 coeffient of expansion
 堰艙,圍堰 cofferdam
 複合燃氣渦輪機 cogag (= combined gas turbine and/or gas turbine)
 組合燃氣渦輪機 cogog (= combined gas turbine or gas turbine)
 鑲齒輪 cog wheel
 齒輪泵 cogwheel pump
 凝聚 cohesion
 盤管,線圈 coil
 抗流線圈 choking coil
 冷卻線圈 cooling coil
 盤管鍋爐 coil boiler
 盤管冷卻器 coiled pipe cooler
 盤管熱交換器 coil heat exchanger
 盤簧,螺鏇彈簧 coil spring
 棕墊 coir mat
 棕索 coir rope
 焦煤 coke
 焦結煤 coking coal
 空氣冷凍機 cold air refrigerating machine
 冷彎試驗,常溫彎曲試驗 cold bending test
 冷脆性 cold brittleness
 冷破裂 cold cracking
 冷拉管 cold drawn pipe (or tube)
 冷拉管 cold drawn tube
 冷溫濾油機 cold filter
 冷溫折緣機 cold flanging machine
 冷作成型 cold forming
 耐冷試驗測定 cold resisting measure
 冷鉚 cold riveting
 冷軋鋼 cold rolled steel
 冷脆性 cold shortness
 冷溫起動 cold starting
 低溫狀態 cold status
 冷藏 cold storage
 冷藏船 cold storage boat
 冷藏庫 cold store (or refrigerating chamber)
 冷水管 cold water pipe (cwp)
 冷作 cold work (or working)
 崩潰 collapse
 可折小艇 collapsible boat
 軸環,圈 collar
 環領軸承 collar bearing
 填補板 collar plate
 推力環滾珠[軸]承 collar thrust ball bearing
 環領止推軸承 collar thrust bearing
 集流管 collecting pipe
 集電環 collecting ring
 集合器,集電器 collector
 集流環 collector ring
 [運]煤船 collier
 防碰電達系統 collision avoidance radar system
 防碰艙壁 collision bulkhead
 塞漏氈,防水墊 collision mat
 膠態燃料 colloidal fuel
 柱廊 colonnade
 色度表,顏色標度,色譜表 colour scale
 色幕(有色玻璃) colour screen
 測深色管 colour tube
 柱 column
 柱與棒錨聯合穩定型鑽油船 column and spud stabilized type drilling rig
 柱穩定型鑽油船 column-stabilized type drilling rig
 計算機輸出縮影片 com (= computer output microfilm)
 碳油混合體 com (= coal oil mixture)
 戰情中心 combat information center (cic)
 多元散裝貨輪 combination bulk carrier
 混載船 combination carrier
 聯合控制,組合控制 combination control
 組合加熱器 combination heater
 組合機械 combination machinery
 混式渦輪機 combination turbine
 有根輪葉 combined blade
 複合循環 combined cycle
 柴油燃氣渦輪複合機 combined diesel and/or gas turbine (codag)
 柴油燃氣渦輪組合機 combined diesel on gas turbine (codog)
 合併效率 combined efficiency
 複合燃氣渦輪機 combined gas turbine and/or gas turbine (cogag)
 組合燃氣渦輪機 combined gas turbine or gas turbine (cogog)
 組合衝動[式]渦輪機 combined impulse turbine
 合成應力,組合應力 combined stress
 複合渦輪機 combined turbine
 複合閥 combined valve
 混構系統 combine system
 燃燒損失 combustible loss
 可燃材料 combustible material
 燃燒 combustion
 完全燃燒 complete combustion
 燃燒室 combustion chamber
 燃燒爆震 combustion knock
 燃燒壓力 combustion pressure
 燃燒率 combustion rate
 燃燒記錄器 combustion recorder
 燃燒速率 combustion speed
 燃燒衝程 combustion stroke
 燃燒溫度 combustion temperature
 燃燒器 combustor
 確認試驗 comfirmation test
 指揮管制中心 command control center (ccc)
 指揮官,艦長,司令 commander
 商船 commercial ship
 共通台座 common bed
 共通污水管 common bilge piping
 普通鏈環 common link
 共通件 common piece
 共通構件表 common piece table
 普通滑動閥 common slide valve
 通訊箱,旗箱 communication box
 連絡管,通話筒 communication pipe
 通訊管 communication tube
 連通閥 communication valve
 整流,換向 commutation
 換向器,整流子 commutator
 整流[式]馬達 commutator motor
 升降口 companion
 升降艙口 companion hatch
 升降梯 companion ladder
 升降口 companion way
 比測儀 comparater
 艙區,艙 compartment
 艙間布置,艙區布置 compartmentation
 羅經 compass
 室內羅經 cabin compass
 羅經校正 compass adjustment
 羅經方位角 compass bearing
 羅經盆 compass bowl
 羅經台 compass bridge
 羅經面,羅經 compass card (or dial)
 羅經航向 compass course
 羅經甲板 compass deck
 羅經面,羅盤 compass dial (or card)
 羅經差 compass error
 兩腳規,圓規 compasses
 磁針,羅針 compass (or magnetic) needle
 圓刨 compass plane
 補償設施 compensating device
 補整機構,均力裝置 compensating gear
 室補償 compensating on chamber
 補償線圈 compensating winding
 補助,補償,補整 compensation
 補整環,補強環 compensation ring
 補償水櫃 compensation tank
 補償器,調整器 compensator
 編譯器 compiler
 配額,員額 complement
 完全退火 complete annealing
 完全燃燒 complete combustion
 完全循環 complete cycle
 全通甲板 complete deck
 全通船艛甲板 complete superstructure deck
 全通船艛船,輕[結]構船 complete superstructure vessel
 完工檢查 complete survey
 順應式平台 compliant platform
 順應式鑽油台 compliant structures (or systems)
 成分,構件 )分量 component
 合成梁 composite beam
 複合鍋爐 composite boiler
 混合結構 composite construction
 複合電焊條 composite electrode
 混合接頭,機焊接合 composite joint
 [木鐵]合構船 composite ship (or vessel )
 熔劑(焊接) composition
 化合物,劑 compound
 復[合]裝甲 compound armour
 復[合]梁 compound beam
 複合周期引擎 compound (or dual, or mixed) cycle engine
 復激發電機 compound dynamo
 複式引擎 compound engine
 複合規,漲縮表 )複合壓力計 compound gauge
 復激發電機 compound generator
 複合衝動[式]渦輪機 compound impulse turbine
 復激馬達 compound motor
 複式壓力計 compound pressure gauge
 複合反動[式]渦輪 compound reaction turbine
 複式蒸汽機 compound steam engine
 復[合]應力 compound stress
 複式渦輪機 compound turbine
 壓縮空氣 compressed air
 壓縮空氣引擎,氣動引擎 compressed air engine
 壓縮空氣閥 compressed air valve
 壓縮軟木 compressed cork
 壓縮氧 compressed oxygen
 可壓縮性 compressibility
 壓縮缸 compressing cylinder
 壓燃機 compressing ignition (or ci) engine
 壓縮 compression
 壓縮效率 compression efficiency
 壓縮點火引擎 compression ignition engine
 壓縮曲線 compression line (or curve)
 壓縮[冷凍]機 compression machine (or compression refrigerating machine)
 抗壓構件 compression member
 壓縮壓力 compression pressure
 壓縮程式,壓縮過程 compression process
 壓縮比 compression ratio
 壓縮應力 compression stress
 壓縮衝程 compression stroke
 壓縮溫度 compression temperature
 壓縮試驗 compression test
 壓縮負荷 compressive load
 壓縮應變 compressive strain
 抗壓強度 compressive strength
 壓應力 compressive stress
 壓縮機 compressor
 制鏈器 chain cable compressor (or controller)
 計算機輔助設計 computer-aided design (cad)
 計算機輔助設計及製圖 computer-aided design and drafting (cadd)
 計算機輔助工程 computer aided engineering (cae)
 計算機輔助放樣 computer-aided lofting (cal)
 計算機輔助製造 computer-aided manufacture (cam)
 計算機輔助試驗 computer aided testing (cat)
 計算機控制 computer control
 計算機繪圖 computer graphics
 計算機化 computerization
 計算機網路 computer network
 計算機輸出縮影片,計算機輸出微軟片 computer output microfilm (com)
 凹面填角焊接 concave fillet weld
 凹透鏡 concave lens
 隱藏燈 concealed light
 暗線,隱藏布線 concealed wiring
 集中負荷 concentrated load
 濃差電位腐蝕 concentration cell corrosion
 同心絞線 concentrically stranded conductor
 同心電纜 concentric cable
 同心圓 concentric circles
 同心度 concentricity
 概念設計,構想設計 concept design
 混凝土包覆 concrete coating
 混凝土重力式鑽油台 concrete gravity platform
 [鋼筋]混凝土船 concrete (or ferro cement ) ship
 輔熱(焊接) concurrent heating
 凝水泵 condensate pump
 冷凝 condensation
 冷凝設備 condensation plant
 冷凝率 condensation rate
 冷凝器,凝結器,復水器,電容器 condenser
 逆流冷凝器 contraflow condenser
 冷凝器泄壓閥 condenser relief valve
 冷凝管 condenser tube
 復水管套圈 condenser tube ferrule
 凝汽機,附冷凝器[動力]機 condensing engine
 冷凝設備 condensing plant
 凝汽渦輪機 condensing turbine
 船況,情況,狀態 condition
 狀態曲線 condition curve
 傳導 conduction
 井口導管(鑽油台) conduction pipe
 傳導性,傳導度 conductivity
 導體 conductor
 槽,溝,管,導管 conduit
 導管接合箱 conduit box
 導[線]管套 conduit bushing
 導[線]管接合匣 conduit connection box
 導[線]管配件 conduit fittings
 錐形離合器 cone clutch
 圓錐規(軸,螺槳) cone gauge
 圓錐部(艉軸) cone part
 圓錐穿刺試驗 cone penetration test
 塔輪 )錐形滑輪 cone pulley
 錐形浮標 conical buoy
 錐頭鉚釘 conical pointed rivet
 錐形掃描 conical scanning
 錐形閥 conical valve
 錐形導槽 conic guide
 連線整補 connected replenishment (onrep)
 連線彎頭 connecting bend
 接線箱 connecting (or connection ) box
 連橋 connecting bridge
 連線管 connecting pipe
 連桿 connecting rod
 連線套管 connecting sleeve
 接線板 connection block
 接線匣 connection box
 接線圖 connection diagram
 線端銜套 connection lug
 司令塔 conning tower
 殘餘碳素 conradson carbon residue (ccr)
 常數 constant
 汽缸常數 cylinder constant
 康[史登]銅線 constantan wire
 定流電焊機 constant current welding machine
 定能電焊機 constant energy welding machine
 定高平台型頂舉平底船型鑽探船 constant height platform type
 定額損失 constant loss
 定螺距 constant pitch
 [徑向]等[螺]距螺槳 constant pitch propeller
 等壓循環 constant pressure cycle
 定壓閥 constant pressure valve
 定額 constant rating
 等反動率輪葉 constant reaction blade
 常定點控制 constant setpoint control
 定速調速器 constant-speed governor
 定衝程噴油泵 constant-stroke injection pump
 等溫循環 constant temperature cycle
 [恆]定拉力絞車 constant tension winch
 定壓電焊機 constant voltage welding machine
 等容循環 constant volume cycle
 拘束係數 constraint coefficient
 構造,結構 construction
 造船渠 construction basin
 結構圖 construction plan
 側面結構圖 construction profile
 建造規範 construction (or detail) specification
 消耗材 construction (or running) store
 顧問工程師 consulting engineer
 耗性導管電熱熔渣焊接法 consumable nozzle electroslag welding (ces )
 消耗品 consumable store
 消耗量 consumption
 耗煤量 coal consumption
 板條墊單面潛弧焊法 contact bar submerged arc welding (cbs)
 正F膠庾爸 contact dummy
 接觸顎夾(焊接) contact jaw
 觸點接通器 contact maker
 貼模法 contact molding
 貼模法(frp) contact mold method
 接觸器 contactor
 接觸電阻 contact resistance
 接觸[片]段 contact segment
 接觸應力 contact stress
 接觸面 contact surface
 容器,貨櫃 )艙櫃 container
 貨櫃駁船 container barge
 貨櫃導具 container guide fitting
 箱裝法,貨櫃化 containerization
 貨櫃吊架 container lifting spreader
 貨櫃船 container ship
 貨櫃吊卸梁 container spreader
 容載系統 containment system
 污染 contamination
 臨時檢驗 contingent (or occasional) survey
 強度連續性 continuity of strength
 連續動作控制器 continuous acting controller
 連續乙級天花板或內襯板 continuous "b" class ceiling or linings
 連續撒氣,連續分供 continuous bleed
 連續鑄造 continuous casting (cc)
 連續控制 continuous control (cc)
 直流電 continuous (or direct) current
 連續[使]用 continuous duty
 連續襯套 continuous liner
 連續構材 continuous member
 連續出力 continuous output
 連續處理(計算機) continuous process
 連續定額 continuous rating
 連續掃描 continuous scanning
 連續使用 continuous service
 連續常用出力 continuous service output (cso)
 額定連續常用出力 continuous service rating (csr)
 連續玻璃氈 continuous strand mat
 連續檢驗 continuous survey
 連續波,等幅[電]波 continuous wave (cw)
 連續焊接 continuous weld
 [整補站]輪廓燈 contour light
 等高線,輪廓線 )等值線 contour line
 契約,契約 contract
 契約設計 contract design
 收縮 contraction
 斷面縮率 contraction (or reduction ) of area
 主機降額最大連續出力 contract mcr
 承包商 contractor
 簽約雙方 contract party
 契約圖 contract plan
 契約規範 contract specification
 逆流冷凝器 contra-flow condenser
 逆流熱交換器 contra-flow heat exchanger
 逆流回熱器,逆流式再生器 contra-flow regenerator
 導葉(螺槳) contra propeller
 對轉螺槳 contrarotating propeller
 對轉螺槳 contra rotating propeller (crp)
 導葉式舵 contra rudder